Latest Posts

• CX500 Thermostat Seals

  

• Transistor Cheatsheet

  

• Add Extra Modes to Xrandr

  This is just a quick reference for what worked for me and is by no means a complete guide. It seems there are lots of reasons why it might not work but here’s mine.

• MATLAB Reference

  Plotting

• Carb Rubber from 3D Printed TPU

  

• CX500 Regulator Replacement

  

• Triumph Peashooter Exhaust Bracket

  

• Triumph Seat Rubbers

  

• OCR Processing

  Can be pretty handy to add selectable/searchable text to a scanned document right?

• Simms 19/20 Vernier Coupling

  

• Milliamp Meter

  I bought this meter as not working off ebay for a couple quid. The indicator appeared stuck as far as I could see, and a good shake would move it around a bit, but definitely didn’t look springy.

• Siphons

  

• Tolerancing 3D Printed Parts: Revised Edition

  Preamble…

• Expanded LTSpice Libraries

  Quick Links

  • New components on gitlab
  • Source

• XT600Z Carb Rebuild

  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 
  • 

• Fastener Identification

  

• My Favourite Git Alias - git adog

  

• Programming over ISP Using The FTDI C232HM Cable

  

• Triumph 3TA Brake Switch Upgrade

  

• Tolerancing and Desgning Printed Parts for Fitment

  

• Adventures in PETG

  Let’s recount the events so far.

• Headphone Hanger for Industrial Racking

  

• New Spokes for the XT600Z

  

• PORTable Amplifier...

  

• Spirits?

  Wondering why there’s so many spirit based cleaning products? Me neither. Either way here’s some notes on ‘em.

• BMW Speedometer Fix

  

• Optimisation of Images for Website Using ImageMagick

  Images were taking too long to load in the galleries, and I gave up using an external service to generate and cache the thumbnail images. This is a bit of a semi-manual solution which could reasonably be automated but probably won’t be.

• XT600Z Pre-Strip Photos

  Images of the XT600Z as we received it (sorta). For use as a reference in the future for what came from where (roughly).

• Brackets in SPICE

  

• HP 3310A Repair Images

  Here are the images taken during repair of the HP 3310A, shows some very tidy construction. So tidy in fact, repair had to be done almost entirely from the component side of the board since it was a right pain to try and remove that mains cap board to replace them.

• Gallery mode test

  This is a test of the gallery include.

• Pico TC-08 USB Interface Part 2

  

• Shower Head for DO-160 Part 10-2 Testing

  

• A Note on Inventor Views and Level of Detail

  

• Fastener Reference

  

• LED Matrix: Part 1

  

• Pico TC-08 USB Interface Part 1

  

• Audio Spectrum Analyser

  Quick Links:

  • Original Article: Sound Card Applications
  • Audacity
  • Visual Analyzer
  • Theremino DAA

• Recapping the HP 3310A

  

• Cura Profiles

  Profiles for use in Cura for use with an Ender 3 V2 printer. I’ll aim to keep this up to date somewhat if there are any profiles I find myself constantly using.